Select Welding Process & Diameters
Choose between Laser Welding or TIG Welding wire specifications.
0.2
mm
Spool / Rods
0.3
mm
Spool / Rods
0.4
mm
Spool / Rods
0.5
mm
Spool / Rods
0.6
mm
Spool / Rods
Custom
Other Sizes
Contact Us →
0.8
mm
10 rods / tube
1.0
mm
10 rods / tube
1.2
mm
10 rods / tube
1.6
mm
10 rods / tube
2.0
mm
10 rods / tube
2.4
mm
10 rods / tube
Custom
Other Sizes
Contact Us →
TECHNICAL DATA SHEET (TDS) & PROCESS GUIDE Standard: GB Cr12MoV / DIN 1.2601 / High-Cr Cold Work
1. Chemical Composition (wt%)
| Element | C | Si | Mn | Cr | Mo | V | Fe |
|---|---|---|---|---|---|---|---|
| Specification | 1.45–1.70 | 0.10–0.40 | 0.15–0.40 | 11.00–12.50 | 0.40–0.60 | 0.15–0.30 | Balance |
2. Welding Parameters: Laser vs. TIG
⚡ Laser Welding 0.2–0.6 mm
| Preheat Temp | Room Temp – 100°C |
| Pulse Power | 110–210 A |
| Shielding Gas | Argon ≥99.99% (3–6 L/min) |
| HAZ Impact | Minimal HAZ, ideal for delicate cutting edge repair |
🔥 TIG Welding 0.8–2.4 mm
| Preheat Temp | 350°C – 450°C Mandatory |
| Welding Current | 40–110 A (DCEN) |
| Shielding Gas | Argon ≥99.99% (8–12 L/min) |
| Post-Heat | Slow cooling or 500°C stress relief annealing |
💡 Key Repair & Operation Instructions:
- As-Welded Hardness Note: As-welded deposit yields 55–58 HRC (different from quenched parent metal 58–62 HRC). Preheating to **350°C–450°C is mandatory** during TIG welding.