Select Welding Process & Diameters
Choose between Laser Welding or TIG Welding wire specifications.
0.2
mm
Spool / Rods
0.3
mm
Spool / Rods
0.4
mm
Spool / Rods
0.5
mm
Spool / Rods
0.6
mm
Spool / Rods
Custom
Other Sizes
Contact Us ā
0.8
mm
10 rods / tube
1.0
mm
10 rods / tube
1.2
mm
10 rods / tube
1.6
mm
10 rods / tube
2.0
mm
10 rods / tube
2.4
mm
10 rods / tube
Custom
Other Sizes
Contact Us ā
TECHNICAL DATA SHEET (TDS) & PROCESS GUIDE Standard: Daido DC53 / PD613 / Hitachi SLD-10
1. Chemical Composition (wt%)
| Element | C | Si | Mn | Cr | Mo | V | Fe |
|---|---|---|---|---|---|---|---|
| Specification | 0.95ā1.05 | 0.80ā1.00 | 0.30ā0.50 | 7.50ā8.50 | 1.80ā2.20 | 0.25ā0.50 | Balance |
2. Welding Parameters: Laser vs. TIG
ā” Laser Welding 0.2ā0.6 mm
| Preheat Temp | Room Temp ā 100Ā°C |
| Pulse Power | 110ā210 A |
| Shielding Gas | Argon ā„99.99% (3ā6 L/min) |
| HAZ Impact | Minimal HAZ, preventing chipping on punching edges |
š„ TIG Welding 0.8ā2.4 mm
| Preheat Temp | 350Ā°C ā 450Ā°C Mandatory |
| Welding Current | 40ā110 A (DCEN) |
| Shielding Gas | Argon ā„99.99% (8ā12 L/min) |
| Post-Heat | Slow cooling or 500Ā°C stress relief annealing |
š” Key Repair & Operation Instructions:
- Superior Toughness Over SKD11: DC53 features refined carbide distribution and higher molybdenum content, providing double the impact toughness of SKD11 at 58ā62 HRC, effectively preventing edge chipping.
- Preheating Requirement (TIG): High alloy content makes preheating to **350Ā°Cā450Ā°C mandatory** during TIG welding to prevent thermal shock and cold cracking.